With the rich experience in market, we manufacture and supply a extensive range of C12-C14 Alcohol Based Glycidyl Ether. It is extremely desired by our most valued patrons for its high quality. It is manufactured using high grade raw material and advanced technology in compliance with set industrial guidelines. In addition to this, our provided C12-C14 Alcohol Based Glycidyl Ether is obtainable at very nominal rates.
Phenyl Glycidyl Ether is used for reducing viscosity of epoxy resin for coatings, composites, grouts etc. It is prepared using sophisticated technology and quality tested chemical compounds in conformity with the per-defined industry standards. It is widely applauded for high efficacy, chemical composition and chemical & physical stability. Additionally, our clientele can avail this range of Phenyl Glycidyl Ether at industry leading prices.
It is a low viscosity, aliphatic monoepoxide reactive diluent, based on n-butyl alcohol. It is compatible with all types of epoxy resin in any proportion Resins diluted with it can be suitably cured by epoxy curing agents for variety of applications. Higher proportion imparts flexibility in cured system and hence affects glass transition temperature significantly.
PG D-4006 should be stored in a cool and dry place, preferably in the sealed container and should not be exposed to direct sunlight. This product has a shelflife of 2 years, if stored in its original container between 2°C and 40°C away from humidity and excessive heat. This may cause pronounced skin irritation, therefore rubber gloves, eye protection creams and breathing mask are recommended. Please refer to the Safety Data Sheet (SDS) for detailed instructions on storage and handling
PG D-4003 is a low viscosity, aliphatic diepoxide reactive diluent based on 1, 4 butane diol. It is compatible with all types of epoxy resins in any proportion. Resins diluted with it can be suitably cured by epoxy curing agents for variety of applications. High proportion imparts flexibility in cured system and hence affects glass transition temperature adversely.
Request Callback
Yes! I am Interested
PG D-4007 Tri Methylol Propane Triglycidyl Ether Epoxy Diluents
PG D-4007 is a low viscosity, high epoxy functionality reactive diluent based on trimethylolpropane. It is compatible with all types of epoxy resins in any proportion. Resins diluted with this can be suitably cured by epoxy curing agents for variety of applications. It provides high cross linking with good reactivity without affecting glass transition temperature significantly of cured system
PG D-4015 is a low viscosity cyclo-aliphatic di- functional epoxy reactive diluent based on cyclohexane dimethanol. . It is primarily used as a reactive diluent for high viscosity epoxy resins. PG D-4015 is compatible in all concentrations with all classes of epoxy resins. Being cyclo-aliphatic in nature, PG D-4015 improves UV resistance of the epoxy formulations.
PG D-4004 should be stored in a cool and dry place, preferably in the sealed container and should not be exposed to direct sunlight. This product has a shelflife of 2 years, if stored in its original container between 2°C and 40°C away from humidity and excessive heat. This may cause pronounced skin irritation, therefore rubber gloves, eye protection creams and breathing mask are recommended. Please refer to the Safety Data Sheet (SDS) for detailed instructions on storage and handling
PG D-4009 should be stored in a cool and dry place, preferably in the sealed container and should not be exposed to direct sunlight. This product has a shelflife of 2 years, if stored in its original container between 2°C and 40°C away from humidity and excessive heat. This may cause pronounced skin irritation, therefore rubber gloves, eye protection creams and breathing mask are recommended. Please refer to the Safety Data Sheet (SDS) for detailed instructions on storage and handling
PG D-4014 is a low viscosity, aliphatic di-epoxide reactive diluent, based on dipropylene glycol. It is compatible with all types of epoxy resins in any proportion. Resins diluted with It can be suitably cured by epoxy curing agents for variety of applications. Higher proportion imparts flexibility in cured system and hence affects glass transition temperature significantly.
PG D-4013 is the mono-glycidyl ether of 2-ethyl hexanol. The primary use of PG D-4013 is as a reactive diluent for high viscosity epoxy resins. PG D-4013 is compatible in all concentrations and those resin blends can be cured with variety of curing agents.As with all monofunctional aliphatic reactive diluents, increase in the level of PG D-4013 in the epoxy resin blend will increase pot life and modify cured resin properties. PG D-4013 posses the lowest viscosity in all the PG D series reactive diluents. PG D-4013 also shows greater dilution efficiency than other PG D series reactive diluents at same concentrations.
PG D-4005 is a low viscosity, long chain aliphatic diepoxide reactive diluent based on polypropylene glycol. It is compatible with all types of epoxy resin in any proportion. Resins diluted with this product can be suitably cured by epoxy curing agents for variety of applications. Higher proportion imparts flexibility in cured system and hence affects glass transition temperature significantly.
PG D-4008 is a clear, low viscosity liquid, aromatic mono epoxide reactive diluent based on ortho cresol. It is compatible with all types of epoxy resins in any proportion. The resins diluted with PG D-4008 can be suitably cured by epoxy curing agents for variety of applications. Higher proportion of this product affects glass transition temperature adversely
PG D-4011 is an unmodified, trifunctional epoxy reactive diluent based on castor oil. It imparts good impact resistance, thermal shock resistance and flexibility when introduced in various epoxy formulations. It has low vapour pressure and odour. It has good compatibility with bisphenol-A based epoxy resin. PG D-4011 when added in epoxy formulations reduces viscosity and lengthens pot life
